Setting the correct boiling point for water
The boiling point for water at a high altitude above sea level
will be lower than the boiling point for water at sea level. To
adjust the boiling point for the altitude in your area, fill the
water container with mains tap water (see "Operation /
Preparing the appliance for use") and then run the Cook
universal 100 °C programme for 15 minutes. Proceed as
described in "Operation".
This procedure sets the correct boiling point for water for the
altitude in your area and also flushes out the waterways.
Warning! A lot of steam will be emitted from the appliance.
If you
move house
, the appliance will need to be re-set for
the new altitude if this differs from the old one by more than
300 m. To do this, descale the appliance (see "Cleaning and
care / Descaling").
Before using for the first time
22
Summary of Contents for DG 5050
Page 59: ...59 ...
Page 60: ...Alteration rights reserved 0508 M Nr 07 207 610 01 ...