Pre-heat
This function can be activated or deactivated.
Recommended temperatures
If you frequently change a recommended temperature it may
be a good idea to change it permanently. You can change
the temperatures within the permitted range.
Water hardness
The steam oven is set at the factory to water hardness setting
IV (Very hard 4). You can set the steam oven for the water
hardness level in your area.
You can use the test strip supplied to check the water
hardness level, or your local water supplier will be able to
advise you on the water hardness of your area.
The water hardness is shown as settings I to IV equivalent to
the German scale 1 to >21 °dH (0.2 >3.8 mmol/l).
Hardness level
Hardness range
Setting
I
1-7 °dH
(0.2-1.3 mmol/l)
Soft 1
II
8-14 °dH
(1.4-2.5 mmol/l)
Medium 2
III
15-21 °dH
(2.7-3.8 mmol/l)
Hard 3
IV
>21 °dH (above
3.8 mmol/l)
Very hard 4
Display
The contrast and brightness can be adjusted.
Volume
The volume of the buzzer and keypad tone can be altered.
Settings
34
Summary of Contents for DG 5050
Page 59: ...59 ...
Page 60: ...Alteration rights reserved 0508 M Nr 07 207 610 01 ...