Setting the correct boiling point for water
The boiling point for water at a high altitude above sea level
will be lower than the boiling point for water at sea level. To
adjust the boiling point for the altitude in your area, fill the
water container with mains tap water (see "Brief operating
instructions / Preparing the appliance for use") and then run
the Steam cooking / Universal (100 °C) programme for 15
minutes. Proceed as described in "Brief operating
instructions".
This procedure sets the correct boiling point for water for the
altitude in your area and also flushes out the waterways.
Warning! A lot of steam will be emitted from the appliance.
If you
move house
, the appliance will need to be re-set for
the new altitude if this differs from the old one by more than
300 m. To do this, descale the appliance (see "Cleaning and
care / Descaling").
Before using for the first time
21
Summary of Contents for DG 5070
Page 62: ...62 ...
Page 63: ...63 ...
Page 64: ...Alteration rights reserved 4810 M Nr 07 207 620 05 ...