Water hardness
The steam oven is set at the factory to water hardness setting
IV (Very hard 4). You can set the steam oven for the water
hardness level in your area.
You can use the test strip supplied to check the water
hardness level, or your local water supplier will be able to
advise you on the water hardness of your area.
The water hardness is shown as settings I to IV equivalent to
the German scale 1 to >21 °dH (0.2 >3.8 mmol/l).
Hardness level
Hardness range
Setting
I
1-7 °dH
(0.2-1.3 mmol/l)
Soft 1
II
8-14 °dH
(1.4-2.5 mmol/l)
Medium 2
III
15-21 °dH
(2.7-3.8 mmol/l)
Hard 3
IV
>21 °dH (above
3.8 mmol/l)
Very hard 4
Display
The contrast and brightness can be adjusted.
Volume
The volume of the buzzer and also the keypad tone which
sounds each time a sensor is touched can be altered. The
keypad tone can also be switched off.
Safety
Once the setting under "System lock" has been changed to
"Permitted", you will be able to activate the system lock to
prevent the steam oven being switched on unintentionally, by
children for example.
Settings
37
Summary of Contents for DG 5070
Page 62: ...62 ...
Page 63: ...63 ...
Page 64: ...Alteration rights reserved 4810 M Nr 07 207 620 05 ...