Problem solving guide
78
Problem
Cause and remedy
The heating-up phase
lasts an unusually long
time.
The water container has a lot of limescale build-up in
it because the appliance was not set correctly for the
hardness of the local water supply.
Set the correct water hardness level for your water
supply (see “Settings”).
Descale the appliance (see “Cleaning and care” –
”Descaling”).
If the water hardness level was in fact set correctly
or the problem occurs again, contact Miele Ser-
vice.
Technical fault.
Switch the appliance off and contact Miele.
The water container has not been pushed into the ap-
pliance properly.
Remove the water container and push it back in so
that it connects.
Switch the steam oven off and then back on again.
The coupling seal in the water container has become
stiff.
Lightly lubricate the coupling seal on the water
container with silicone grease, as described in
“Cleaning and care” – “Water container”.