Imp
ort
Ap
plia
nce
s.c
om
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Cleaning and care
70
Coupling seal
If, after prolonged use, the water
container becomes difficult to remove
and replace or the fault message
appears, rub a small amount of the
silicone grease supplied into the
inside of the coupling seal.
Do not take the seal out to lubricate it.
Misuse of silicone grease!
Remove any silicone grease from
your skin either by wiping it off or by
washing it off.
If the grease gets into the eyes, it
must be rinsed out with plenty of
clean water.
If it is swallowed, seek medical
advice.
The coupling seal should be replaced
with a new one if it becomes brittle or
porous or if an unusually large
amount of water collects on the floor
of the water container compartment.
Coupling seals can be ordered from the
Miele Spare Parts Department (see the
end of this booklet for contact details).
Only use the silicone grease
supplied. On no account must
margarine or oil or any other
domestic grease or fat be used, as
these can cause the seal to swell.