Imp
ort
Ap
plia
nce
s.c
om
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
What to do if ...
74
Problem
Cause and remedy
The fan can still be
heard after the
appliance has been
switched off.
The fan is still running.
The appliance is fitted with a fan which removes
steam from the oven. The fan will continue to run for
a while after the appliance has been switched off. It
will switch itself off automatically after a while.
The water container has
become harder to put
into the appliance and
take out again.
The coupling seal in the water container has become
stiff.
Lightly lubricate the coupling seal on the water
container with silicone grease, as described in
"Cleaning and care - Water container".
After moving house the
appliance no longer
switches from the
heating-up phase to the
cooking phase.
The boiling temperature of the water has changed as
the altitude of the new location for the appliance
differs from the old one by at least 300 m.
To adjust the boiling temperature, you need to
descale the appliance (see "Cleaning and care -
Descaling").
During operation an
unusually large amount
of steam escapes, or
steam escapes from
parts of the oven where
it does not usually.
The door is not properly closed.
Close the door.
The door seal is not correctly fitted.
Press it in all the way round the door to make sure
it is fitted evenly.
The door seal is damaged, e.g. cracks can be seen.
Replace the door seal. This can be ordered from
Miele.
After a period of time,
the door makes a noise
when it is opened and
closed.
The door has become stiff.
Lubricate the hinges with the silicone grease
supplied.
The
symbol appears
in the display and an
audible tone may
sound.
The water container has not been pushed into the
appliance properly.
Remove the water container and push it back in so
that it connects.
There is not enough water in the water container. The
water level must be between the two marks.
Fill the water container