Imp
ort
Ap
plia
nce
s.c
om
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
What to do if ...
75
Problem
Cause and remedy
The heating-up phase
lasts an unusually long
time.
The water container has a lot of limescale built-up in it
because the appliance was not set correctly for the
hardness of the local water supply.
Set the correct water hardness level for your water
supply (see "Settings).
Proceed as described in "Cleaning and care -
Descaling".
If the water hardness level was in fact set correctly
or the problem occurs again, contact the Service
Department.
Technical fault.
Switch the appliance off and contact Miele.
The water container has not been pushed into the
appliance properly.
Remove the water container and push it back in so
that it connects.
Switch the steam oven off and then back on again.
The water container has become harder to put into
the appliance and take out again.
Lightly lubricate the coupling seal on the water
container with silicone grease, as described in
"Cleaning and care - Water container".