Description of the functions
23
Heating-up phase
During the heating-up phase the dis‐
play will show the temperature in the
cooking compartment and
Heating-up
phase
as it rises in all programmes ex‐
cept
Automatic programmes
,
Descale
.
When cooking with steam, the duration
of the heating-up phase will depend on
the quantity and the temperature of the
food. In general the heating-up phase
will last for approx. 5 minutes. The du‐
ration will be longer if you are preparing
refrigerated or frozen food.
Cooking phase
The cooking phase begins when the set
temperature is reached. During the
cooking phase, the duration remaining
will be shown in the display.
Steam reduction
The appliance door will open a fraction
just before the end of a cooking pro‐
gramme to release some of the steam
from the cabinet.
Steam reduction
will
appear in the display. The door will then
close automatically.
Steam reduction can be switched off if
you wish (see "Settings - Steam reduc‐
tion"). If switched off, there will be a lot
of steam emitted from the cabinet when
the door is opened.
Oven interior lighting
For energy saving reasons, the oven in‐
terior lighting has been set at the facto‐
ry to go out after the programme has
begun.
If you want the lighting to remain on
during cooking, the relevant factory de‐
fault setting needs to be changed (see
"Settings - Lighting").
If the door is left open at the end of a
cooking programme, the oven lighting
will switch off automatically after 5 mi‐
nutes.
The lighting can be switched on for
15 seconds by pressing the
button
on the control panel.
Summary of Contents for DG 6401
Page 92: ...Note for test institutes 92 ...