Cleaning and care
97
Descaling
We recommend using Miele descaling
tablets for descaling the appliance
(see "Optional accessories"). These
have been specially developed for
Miele appliances to optimise the des‐
caling process. Other descaling
agents, which contain other acids be‐
sides citric acid and/or other undesira‐
ble substances, such as chlorides, for
example, could damage the steam
oven. Moreover, the descaling effect
required could not be guaranteed if
the descaling solution was not of the
appropriate concentration.
Do not spill descaling agent onto
metal surfaces. This can cause
marks to appear.
However, should any descaling
agent get onto these surfaces, wipe
it away immediately.
The steam oven needs to be descaled
after a certain number of operating
hours. When the steam oven needs to
be descaled, a number will appear in
the display indicating the number of
cooking processes remaining before
the appliance locks out. After the last
remaining cooking process, the appli‐
ance will lock out.
We recommend that you descale the
appliance before it locks out.
The water container will need emptying,
rinsing and refilling with fresh tap water
during descaling.
The
Finish at
and
Start at
functions are
not available while descaling is being
carried out.
Switch the steam oven on and se‐
lect
.
Scroll through the list until
Descale
is
highlighted.
Confirm with OK.
A message will appear in the display:
Fill the water container with cold
fresh tap water up to the level mark‐
er
and drop 2 Miele descaling tab‐
lets in it.
Push the water container into the ap‐
pliance until it connects.
Confirm with OK.
The descaling process will now begin,
and the time remaining will count down
in the display.
It is only possible to cancel the desca‐
ling process during the first 6 minutes.
Do not switch the appliance off before
the descaling process has finished. If
if is switched off before the end of the
process, the whole process will have
to be started from the beginning
again.
During the course of the descaling
process, the water container needs to
be rinsed and filled with fresh water.
Follow the instructions in the display.
When the descaling process has finish‐
ed, a message will appear in the dis‐
play.
Summary of Contents for DG 6401
Page 92: ...Note for test institutes 92 ...