Operation
34
Sequence of an automatic
programme
Up until the start time
the function,
the selected temperature, cooking
duration (time left),
Start at
and the start
time will appear in the display.
After the programme has started
you
can follow the heating-up phase in the
display until the required temperature
has been reached.
Once this temperature is reached a
buzzer will sound, if this option has
been switched on (see "Settings -
Volume - Buzzer tones").
After the heating-up phase
you can
follow the time counting down in the
display. The last minute counts down in
seconds.
At the end of the programme
a buzzer
will sound, if this option has been
switched on (see "Settings - Volume -
Buzzer tones").
The steam generator and lighting will
switch off.
Steam reduction
(only with a
temperature above approx. 80 °C) and
Process finished
will appear in the
display.
You have the option of saving your
settings as a User programme (see
"User programmes") or increasing the
cooking duration via
Change
. Touch
twice to go to the main menu.
Changing settings during a
programme
Select
Change
.
The following will appear in the display:
–
Temperature
–
Duration
–
Ready at
–
Start at
If the temperature in the oven is too
high
Ready at
and
Start at
are not
displayed.
–
Open further settings
Changing the temperature
Change the temperature.
Confirm with OK.
The programme will restart with the
new temperature.
You can permanently reset the
recommended temperature to suit
your personal cooking preferences.
(See "Settings - Recommended
temperatures").
Changing the cooking duration
Change the duration.
Confirm with OK.
The programme will restart with the
new duration.
Summary of Contents for DG 6800
Page 126: ......