Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
184
Installing the steam oven
Before installing and connecting the
steam oven, please read the
instructions in “Installation - Mains
water connection” and “Installation -
Drainage”.
Connect the mains connection cable
to the appliance.
Feed the water inlet hose and the
drain hose through the cut-out in the
base of the building-in niche.
Use the handle cut-outs on the side
of the casing to lift the appliance.
The steam generator may
malfunction if the steam oven is not
on a level surface.
The maximum deviation from the
horizontal that can be tolerated is 2°.
Push the steam oven into the
installation niche and align. When
doing so, make sure that the mains
connection cable and water hoses do
not get trapped or damaged.
Open the door.
Secure the steam oven to the side
walls of the unit using the wood
screws supplied (3.5 x 25 mm).
Connect the steam oven to the water
inlet and drain (see “Installation -
Mains water connection” and
“Installation - Drainage”).
Connect the appliance to the mains
electricity supply.
Check the appliance for correct
function in accordance with the
operating instructions.