A display test is carried out for 10 seconds after the
appliance has been installed and after a power cut. The fan
comes on at the same time. The appliance cannot be used
during this time.
Please stick the extra data plate for the appliance supplied
with this documentation in the space provided in the "After
sales service" section of this booklet.
Cleaning and heating up for the first time
^
Remove any protective foil and sticky labels.
^
Remove the anti-slip mat and, if applicable, the rack from
the drawer, and sponge both with warm water and a little
washing-up liquid. Dry using a soft cloth.
^
Wipe the appliance inside and out with a damp cloth only,
and then dry with a soft cloth.
^
Replace the anti-slip mat and the rack (if applicable) in the
drawer.
Then heat the empty drawer for at least two hours.
^
Switch the appliance on by touching the On/Off
s
sensor.
^
Touch the
X
sensor repeatedly until the
s
symbol lights
up in the display.
^
Touch the
6
sensor repeatedly until the LED on the far right
lights up.
^
Touch the
T
sensor repeatedly until 2h lights up.
^
Close the drawer.
The warming drawer is fitted with a softclose self-closing
mechanism.
The drawer is fitted with a contact switch, which ensures
that the heating element and fan in the appliance only work
when the drawer is closed.
Before using for the first time
13
