Re-setting the filter indicator
The filter indicator still flashes in the
display.
^
Touch the access button "
p
" so it
turns yellow.
^
Note the position of the
X
button, but
do not touch.
^
Touch the access button "
p
" again so
it turns white.
Only the access button "
p
" is visible.
^
Place one finger on the position of
the
X
button and hold (the
X
button
will not be visible).
^
While holding down the
X
button,
press the access button "
p
" once.
Keep holding the
X
button down until
the following appears in the display
(approx. 5 seconds).
^
Tap the
X
button until an
^
appears
in the display.
^
Touch the access button "
p
" again.
By touching the
X
button you can
select the following settings:
^ 0
: filter is installed
^ 1
: filter is not installed (external filter)
^ 2
: filter change confirmed
^ -:
return to menu
^
Tap the
X
button until
^ 2
appears in
the display.
^ 1
should only be selected if an
external filter or bypass cartridge is
being used. See "Deactivating the
water filter".
^
Press and hold the access button "
p
"
for 2 seconds to confirm the filter
change.
The filter is now reset.
Water filter
30
Summary of Contents for F 1411 Vi
