Aligning the appliance
^
Align the appliance with the custom
front.
The installation aids
e
on the
appliance door have been designed for
the following custom door thicknesses:
– 3/4" (19 mm)
– 1 1/2" (38 mm).
The height-adjustable feet at the front
and rear can all be adjusted from the
front:
– Front feet:
Adjust with a rachet 5/16" (8 mm)
f
.
– Rear feet:
Adjust with a (cordless) screwdriver
and/or a rachet 5/16" (8 mm) for fine
adjustment
g
.
^
Use a level to align the installation
aids
e
on the door.
Important!
When unscrewing the
height-adjustable feet, proceed
gradually, alternating between left
and right.
– Unscrew the height-adjustable feet
until the mark on the base has
reached the indicated guide
dimension 1 1/4" (32 mm). The guide
dimension of 1 1/4" (32 mm) is
related to a niche height of 84"
(2134 mm).
^
Align the appliance again using a
level.
Note:
– When unscrewing the
height-adjustable feet, proceed
gradually, alternating between left
and right.
– If using a wooden beam as an
alternative anti-tip device, rotate the
appliance all the way toward the
wooden beam.
Installing the appliance
68
Summary of Contents for F 1471 Vi
Page 50: ......
Page 58: ...Niche dimensions Niche width A F 1471 Vi 18 457 mm Installation 58 ...
Page 86: ...86 ...
Page 87: ...87 ...
