background image

IMPORTANT SAFETY INSTRUCTIONS

10

 

The ice cube maker must only be connected to a cold water line.

 

DANGER of injury! Never tamper with the movable components

on the ice cube maker or the element on the ice cube maker.

Correct use

 

The refrigeration appliance is designed for use within a specific

climate class (room temperature range). Do not use in a climate class
for which it is not designed. A lower room temperature will cause the
compressor to switch off for longer periods, meaning that the refrig-
eration appliance is unable to maintain the required temperature.

 

WARNING! DANGER of overheating! Do not cover or block the air

vents. This can impair the efficiency of the appliance, increase the
power consumption and cause damage to the appliance.

 

If storing food which contains a lot of fat or oil in the appliance,

make sure that it does not come into contact with plastic compo-
nents as this could cause stress cracks or break the plastic.

 

Risk of fire and explosion. Do not store any explosive materials or

products containing flammable propellants (e.g., spray cans) in the
appliance. Electrical components can cause flammable mixes of
gases to ignite.

 

Risk of explosion. Do not operate any electrical equipment (e.g.,

an electric ice-cream maker) inside the refrigeration appliance. Risk
of sparking and explosion.

 

Risk of injury and damage. Do not store cans or bottles containing

carbonated drinks or liquids which could freeze in the freezer zone.
Otherwise they could burst.

 

Risk of injury and damage. When chilling drinks in the freezer

zone, make sure that bottles are not left in for more than one hour.
Otherwise they could burst.

Summary of Contents for F 2414 SF

















































































































Reviews: