Installation
*INSTALLATION*
28
Risk of damage and injury due to
the refrigeration appliance tipping
over.
If the anti-tip brackets are fixed too
high up, they cannot be used to se-
cure the refrigeration appliance.
The distance between the
anti-tip brackets and the refrigeration
appliance must not exceed
5/16" (8 mm).
2
2
Make sure that the gap between the
refrigeration appliance‘s rear wall and
the installation niche does not exceed
2" (51 mm).
Place a wooden wedge behind the
anti-tip brackets
if necessary.
While holding the anti-tip brackets in
place, mark the necessary drill holes
on the rear wall of the installation
niche.
Retaining screws for different uses
and types of material are supplied in
the accompanying pack.
2
Securing to a concrete wall
2
Securing to a wooden wall
