Selecting additional settings
58
Switching on the
Door Assis-
tant
You can choose between the two Door
Assistants
Push2Open
and
Pull2Open
.
The default Door Assistant is
Push2Open
.
The
Push2Open
Door Assistant is suit-
able for cabinet fronts without handles.
The door will then open automatically
when you gently press against it.
The
Pull2Open
Door Assistant is suitable
for cabinet fronts with handles. The ap-
pliance door can be opened easily with
little force.
Risk of damage if the appliance
door is closed prematurely.
When the Door Assistant is switched
on, repeatedly closing the appliance
door early can lead to damage or
malfunctions.
Refrain from holding onto or closing
the appliance door while automatic
door opening is still extended. If you
have indeed closed the appliance
door, leave it closed for 5 minutes.
Automatic door opening resets itself.
Switching on
Push2Open
In Settings mode
, use the
and
sensor controls to select
Door As-
sistant
and select
OK
to confirm your
selection.
Use the
and
sensor controls to
select
Mode
and select
OK
to confirm
your selection.
Use the
and
sensor controls to
select
Push2Open
and select
OK
to
confirm your selection.
Touch the
sensor control to return
to the previous menu level.
– Adjusting the intensity
You can also adjust the intensity of the
Push2Open
function. The lower the set
intensity, the less force required when
you push against the appliance door.
In Settings mode
, use the
and
sensor controls to select
Door As-
sistant
and select
OK
to confirm your
selection.
In Settings mode
, use the
and
sensor controls to select
Intensity
and select
OK
to confirm your selec-
tion.
Use the
and
sensor controls to
select the right intensity (
Low
,
Medium
,
High
) and select
OK
to confirm your
selection.
