Before building the appliance in, you
will need to decide on which side the
door is to be hinged. If left hand door
hinging is required, follow the
instructions below.
^
Open the appliance door.
^
Remove cover
a
by hand, and
remove cover
b
using a screwdriver.
^
Loosen fixing screws
c
slightly.
^
Slide the door outwards
d
and lift it
off.
^
Unscrew fixing screws
c
completely,
and loosely screw them into the holes
on the opposite side of the appliance
e
.
If you have put locking pins into the
hinges to stop the door opening too far:
^
Remove the locking pins from the top
of the hinges.
To remove the soft-close mechanism
^
Place the door with the outer side
downwards on a stable surface.
^
Open the hinges, and loosen the
screw in mounting
a
.
Warning. The soft-close mechanism
snaps shut when dismantled.
Danger of injury.
^
Unscrew ball joint
b
using an
adjustable spanner, and remove soft-
close mechanism
c
together with the
ball joint.
Changing the door hinging
36
Summary of Contents for F 456 i-3
