All building-in instructions given are
for a
right-hand hinged appliance
.
If you have converted the appliance
to left-hand hinging, you will need to
adapt these instructions accordingly.
Aligning the housing unit
Before installing the appliance, the
housing unit must be carefully aligned
using a spirit level. The housing unit
corners must be at right angles, as
otherwise the appliance furniture door
will not align correctly with the 4
corners of the unit.
Preparing the appliance
^
Fit cover strip
a
into position and
secure it with screws
b
.
^
With 16 mm thick unit walls
:
Shorten sealing strip
c
to the height
of the niche.
Stick the sealing strip to the side of
the appliance on which the door is
opened.
Clip spacer piece
d
over the hinges.
Building in the appliance
39
Summary of Contents for F 456 i-3
