If there is a continuous plinth in the
kitchen a ventilation gap will need to be
made in the plinth for the appliance:
Building-under
height [mm]
Dimension H
[mm]
820
870
60+1
110+1
The ventilation gaps must not be
covered over.
Fitting a furniture door
^
A gap of 8 mm must be maintained
between the appliance door and the
fixing bracket.
^
Push fitting aids
a
up to the height of
the furniture door: the lower edge X
of the fitting aids must be at the same
height as the upper edge of the
furniture door being fitted, see
-
on
the diagram.
^
Undo nuts
b
and take fixing bracket
c
off together with the fitting aids.
Installing the appliance
36