All building-in instructions given are
for a
right hand hinged
appliance.
If you have converted the appliance
to left hand hinging you will need to
adapt these instructions accordingly.
Building into a peninsular run
When built into a peninsular run, the
rear of the building in niche must be
fitted with a kitchen furniture panel.
Aligning the housing unit
Before installing the appliance, the
housing unit must be carefully aligned
using a spirit level. The housing unit
corners must be at right angles, as
otherwise the appliance furniture door
will not align correctly with the 4
corners of the unit. Align the furniture
door with the hinges.
Preparing the appliance
^
Slide cover strip
a
into the holder as
shown, with the bumps facing
downwards. The bumps will fit into
keyhole slots
b
. The cover strip is
then flush with the side of the
appliance on which the door is
opened
c
.
Building in the appliance
35
Summary of Contents for F 9212 I
Page 38: ...38 ...
Page 39: ...39 ...
Page 40: ...Alteration rights reserved 5006 F 9212 i M Nr 07 021 360 00 en GB ...