Joining the two appliances
together
The following fixing parts are supplied:
*
Colour depending on model (the other
colour variations are not needed)
The following tools are supplied:
r
SW 10 spanner
q
SW2 allen key
(not required)
You will also need the following:
– Spirit level
– Cordless screwdriver
– Torx
®
25 screwdriver
^
Before starting, peel off any
protective foil from the appliance
casing.
Installation steps at the front of the
appliances
^
Use spanner
r
supplied to screw in
feet (for supporting the appliance
doors)
a
completely. They must not
come in contact with the floor.
^
Fit covers
a
to the four front feet.
^
Place the appliances next to one
another so that the fronts are aligned,
leaving a gap of 10 mm between
them.
Installing in a side-by-side combination
36