Installation steps at the front of the
appliances
^
Screw in middle feet
c
completely.
They must not come in contact with
the floor.
^
Align the joined appliances using
outer feet
b
.
^
Align the feet using the spanner
supplied.
^
Position the front of the long stainless
steel trim
l
in the gap, making sure
that it is located above connecting
panel
g
.
Pressing both ridges along the trim
together as you do so makes it
easier to fit the trim into the gap.
^
Carefully work stainless steel trim
l
into the gap. Use a soft cloth to do
this to avoid denting the trim.
^
Carefully remove the protective foil
from the stainless steel trim.
Installing in a side-by-side combination
39