^
Remove cap
h
from the bearing
bush in the door and refit on the
opposite side.
^
Using a screwdriver, remove spring
clamp
i
from underneath the door
and fit it on the opposite side.
^
Pull hinge pin
a
together with disc
b
and adjustable foot
c
upwards and
off.
^
Remove cover cap
d
.
^
Undo screws
e
and take hinge plate
f
off.
^
Undo the screw of hinge part
g
on
hinge plate
f
slightly. Fit it into the
hole opposite in hinge plate
f
and
tighten up the screw.
^
Refit cover cap
d
in the other hole.
^
Remove cover
i
.
^
Unscrew and remove screw
h
and
refit it into the outer hole of the
opposite side.
^
Turn cover
i
through 180°, and fit it
into the holes on the other side.
Changing the door hinging
43