^
Unscrew upper hinge pin
k
using a
suitable spanner.
^
Remove covers
l
with a flat-bladed
screwdriver from the front.
^
Screw in upper hinge pin
k
on the
opposite side using a suitable
spanner.
^
Refit covers
l
from the back on the
opposite side, and then click them
into place at the front.
^
Remove cap
m
from door bearing
bush in the door and refit on the
opposite side.
^
Using a flat-bladed screwdriver,
remove spring clamp
n
from
underneath the door and fit it on the
opposite side.
^
Pull hinge pin
e
with washer
o
out
of the door bearing bush from below.
Important. The opening on washer
o
must be placed over the notch on
hinge pin
e
so that the washer
o
sits on the washer of hinge pin
e
.
^
Place hinge pin
e
with washer
o
in
the door bearing bush on the
opposite side. Important: the notch
on the pin must face the inside of the
door and the groove the outside.
Changing the door hinging
43
