Selecting further settings
47
Adjusting the volume of alarms and
buzzers
/
You can adjust the volume of alarms
and buzzers (e.g. in the event of a door
alarm or fault message). You can also
switch off the alarms and buzzers if
they disturb you.
In Settings mode
, use the
or
sensor control to scroll to the
symbol.
Touch
OK
.
Use the
and
sensor controls to
select the volume you want for
alarms and buzzers.
Touch
OK
.
appears in the display when the
alarms and buzzers are switched off.
Adjusting the display brightness
You can adjust the display brightness to
suit the lighting conditions in the room.
In Settings mode
, use the
or
sensor control to scroll to the
symbol.
Touch
OK
.
Use the
and
sensor controls to
select the display brightness you
want.
Touch
OK
.
Switching off demo mode
Demo mode
allows the refrigeration
appliance to be presented by dealers
without the cooling system being
switched on. This setting is not needed
for domestic use.
If demo mode has been switched on
as a default setting,
will show on the
display when the refrigeration appli-
ance is switched on.
Touch the
OK
sensor control on the
control panel.
Miele
will appear initially in the display,
followed by the start screen.
Touch
OK
.
In Settings mode
, use the
or
sensor control to scroll to the
symbol.
Touch
OK
.
After demo mode
has been switched
off, the refrigeration appliance switches
off and must be switched on again.