Problem solving guide
66
Message
Cause and remedy
is lit up in the tem-
perature display and an
alarm is also sounding.
The
temperature alarm
has been activated; the tem-
perature in the freezer section has risen higher or
fallen lower than the temperature set.
Possible reasons for this include:
– The appliance door has been opened too fre-
quently.
– A large quantity of fresh food has been placed
in the freezer without switching on the Super-
Freeze function.
– A prolonged power cut (mains outage) has oc-
curred.
– The refrigeration appliance has a fault.
Touch
OK
.
The alarm message is confirmed:
goes out and
the alarm stops.
The warmest temperature recorded in the refrigera-
tion appliance will flash for about 1 minute in the dis-
play. Then the temperature display will change to the
current temperature.
You can exit from the flashing temperature display
early:
Touch
OK
.
The warmest temperature displayed will disappear.
The display will then revert to showing the current
temperature in the freezer.
Rectify the cause of the alarm.
Depending on the temperature displayed, you
should check whether food in the freezer has star-
ted to thaw or has defrosted. If it has, it should be
used as soon as possible. Defrosted food may
only be re-frozen after it has been cooked.