Sets the temperature
^
Use the two buttons underneath the
display to set the temperature.
By touching the button:
– the temperature will get colder
– the temperature will get warmer
While the temperature is being set, the
temperature value will flash.
When you touch the buttons, you will
see the following changes in the
display:
– When first touched: The
last
temperature selected
flashes.
– Each subsequent touch of the
button:
The temperature value adjusts in 1°
steps.
– Keeping your finger on the button:
The temperature changes
continuously.
Approximately 5 seconds after you
release the button, the
actual
temperature value in the appliance will
be displayed.
When you have adjusted the
temperature, wait for
approx. 6 hours
if the appliance is not very full
and for
approx. 24 hours if the appliance is
full
before checking the temperature
display, as it will take this long for the
appliance to reach the temperature.
If, after this amount of time, the
temperature is too high or too low,
adjust it again.
Possible setting values for the
temperature
The temperature can be adjusted from
5°F to -18.4°F (-15°C to -28°C).
The right temperature
18
