Indication in the display
Problem
Possible cause
Solution
The alarm symbol
;
flashes in the
display.
The temperature in the
freezer has risen higher or
fallen lower than the
temperature which has
been set. This could be due
to:
– the door being opened
too frequently.
– a large quantity of fresh
food has been placed in
the freezer at once
without turning on the
SuperCool function.
– there has been a lengthy
interruption of the power
supply.
^
Remedy the alarm. The
alarm symbol
;
will
disappear and the
audible tone will stop.
Depending on the
temperature, check
whether the food has
defrosted or started to
defrost. If this is the case,
cook the food before
freezing again.
The acoustic alarm
sounds and the
power failure symbol
t
appears in the
display.
The temperature
display also shows
the warmest
temperature
recorded in the
freezer during the
loss of power or
interruption of the
electricity supply.
The temperature in the
appliance rose too much
over the past days or hours
because of a power outage
or interruption of the
electrical supply.
The appliance will go back
to the last temperature
setting when the power is
back on.
^
Touch the Alarm Off
button.
The warmest temperature
display will go out. The
display will then revert to
showing the current
temperature in the freezer
section.
^
Depending on the
temperature displayed,
you should check the
condition of food in the
freezer. If it has defrosted
or started to defrost,
check that it is still safe to
use and, if so, use it as
soon as possible.
Defrosted food may only
be re-frozen after it has
been cooked.
Frequently asked questions
50
