Information regarding the
water connection
All plumbing work should be carried
out by a suitable qualified person, in
accordance with local and national
regulations.
Disconnect the appliance from the
power supply before connecting it to
the water supply.
Before connecting the water hose
for the ice cube maker, ensure the
water supply is completely turned
off.
The water being used should meet
the drinking water standards of the
country where the machine is used.
All devices used for connecting the
appliance to the water supply must
comply with the current national and
local safety regulations in the
country in which the appliance is
being installed.
All units and systems used to supply
water to the appliance must also
comply with the applicable
requirements of the respective
country.
The appliance must be connected to
a cold water line that:
– is directly connected to the fresh
water supply in order to ensure a
circulation of the water in the cold
water line.
Avoid using a water line in which the
water is allowed to pool.
This can affect the taste of water
and ice cubes.
– withstands the operating pressure.
– fulfills the hygiene regulations.
The water pressure must be between
22 and 87 psi (1.5 and 6 bar).
A shut-off valve must be provided
between the water line and the water
supply of the building to ensure that the
water supply can be cut off if
necessary.
The water supply should be easily
accessible after the machine has
been built in.
Before commissioning, the water
line needs to be vented by a
qualified technician:
Plumbing
62
