The water connection can be found at
the back of the appliance. The solenoid
valve
b
has a 3/4" connection thread.
The connection parts included with the
appliance permit the connection of
various water lines (a water line is not
included in delivery).
^
Remove the cap
a
from the solenoid
valve
b
.
^
Insert the adapter
c
into the union
nut
d
.
,
In the following, please note:
inserting the water filter incorrectly
can cause damage!
^
Place the water filter
e
on top of the
adapter
e
as shown in the picture.
,
Do not over-tighten the union
nut, damage can result!
^
Connect the union nut
d
to the
solenoid valve
b
and tighten it.
^
If you want to divert the water line by
90°, screw on the elbow
f
.
In case of a water line with a 1/4"
thread:
^
Connect the water line
g
(e.g.,
copper) using the clamping ring
h
and the nut
i
on the adapter
c
or
elbow
f
.
In case of a water line with a 7/16"
24-UNS thread:
^
Connect the water line
g
directly to
the adapter
c
or elbow
f
(a
clamping ring
h
and nut
i
are not
required).
Plumbing
63
