Top ventilation cross-section
The ventilation cross section at the top
of the appliance can be constructed in
different ways:
a
directly above the appliance with a
ventilation grille (free airflow of at
least 78 3/4"
2
).
b
in between the housing unit and the
ceiling.
c
through a suspended ceiling.
Ventilation slits
If you would like to use the ventilation
slits, proceed as follows:
^
Cut an opening in the plinth
b
as
shown in the figure.
^
Place the ventilation slits
a
into the
opening.
^
Push the snap connector
c
into the
ventilation slits from the rear until the
hooks are touching the plinth.
^
Reinstall the plinth with the ventilation
slits.
Installation information
69
