^
Check the position of the fixing
bracket at the top and bottom front
edge of the cabinet side wall again.
This will help maintain a
1 5/8"
(42 mm)
distance all the way around
from the front edges of the cabinet
side walls.
On cabinetry with door fittings (e.g.
stubs, seals etc.)
the dimension of
these must be taken into account when
making sure there is a gap all round of
1 5/8" (42 mm)
.
^
Pull the appliance forward the
appropriate amount to suit the
installed dimensions.
The hinges and covers will now be
positioned to suit the dimensions.
Tip:
Remove the door fittings. This will
ensure that the door is flush with the
surrounding kitchen unit cabinet doors.
^
p
Align the appliance on both sides
by altering the adjustable feet using
the wrench supplied.
If the all round gap of 1 5/8" (42 mm)
is not maintained between the
appliance housing and the front
edge of the housing unit side wall,
the door may not shut properly.
This can cause ice to build up,
condensate to accumulate and lead
to faults in the appliance. These can
all lead to increased energy
consumption.
Securing the appliance in the
niche
^
Push the hinged side of the
appliance to the cabinet wall.
^
Screw the particleboard screws
s
through the hinge plates at the top,
bottom and then in the middle to
secure the appliance to the housing
unit.
Installing the appliance
82
