General problems
Problem
Possible cause
Remedy
The time display is
dark.
The time display has
switched off automatically
to save energy (Standby
mode).
Press any button (apart from
the Off button
V
).
The time display will light up.
The Salt indicator
light starts flashing
The salt reservoir has not
been closed properly.
Close the flap to the salt
reservoir properly.
The dishwasher
stops during a
programme.
The In-operation
indicator is flashing
quickly.
The buzzer sounds.
The Salt indicator
flashes when the
door is open.
Fault code F86
shows in the display.
The salt reservoir has not
been closed properly.
– Switch the dishwasher off
with the Off button
V
.
– Close the flap to the salt
reservoir properly.
– Start the programme
again.
Problem solving guide
54