Issue
Possible fault
Solution
Detergent is left in the
dispenser at the end of a
program.
The dispenser was damp
when detergent was
added.
Dry the dispenser before
adding detergent.
The detergent lid cannot
be closed properly.
Detergent residue is
blocking the catch.
Remove the residue.
The door and the
interior walls are still
wet after a program has
finished.
This is not a fault. It is the
normal operating mode of
the drying system.
The moisture will
evaporate after a short
time.
Water remains in the
wash cabinet at the end
of a program.
Before fixing the fault:
– Turn the dishwasher off
by touching the
s
control.
The triple filter in the wash
cabinet is clogged.
Clean the triple filter. See
"User Maintenance
Instructions".
The drain pump or the
non-return valve may be
blocked.
Clean the drain pump and
the non-return valve, see
maintenance instructions.
The drain hose is kinked.
Remove any kinks from
the drain hose.
Frequently asked questions
58