Switching on and off
Switching on
Close the door
Open the stopcock (if it is closed).
Turn the Programme (sequence indi-
cator) selector switch in a clockwise,
until a resistance is felt, direction to
the “start point“ of the required pro-
gramme, e.g. UNIVERSAL PLUS.
Then turn the Temperature selector
switch to the required temperature
e.g. “65 °“.
The programme cycle begins.
If you turn the selector past the
“start point“ by mistake:
Turn the temperature selector switch
to “0-Off“.
Turn the programme selector switch
in a clockwise direction to the re-
quired start point.
Re-set the temperature with the tem-
perature selector switch.
Programme change
It is possible to change temperature
within a programme, e.g. UNIVER-
SAL 55 ° to UNIVERSAL 65 °.
If changing a programme, e.g.
UNIVERSAL PLUS to UNIVERSAL it
is advisable to first turn the dish-
washer off.
Switching off
On completion of a programme:
Turn the temperature selector to
“0-Off“.
If the dishwasher is not to be used for a
longer period of time, e.g. whilst on holi-
day:
Turn off the stopcock.
Switching on and off
30