background image

Guide to the appliance

18

Control panel

a

Programme selection

ECO

= ECO

 Auto

= Auto 45–65 °C

 45 °C

= Gentle 45 °C

 65 °C

= QuickPowerWash 65 °C

 75 °C

= Intensive 75 °C

= Further programmes/
settings

b

Display
For further information, see “Guide
to the appliance” in the “Display
functions” section.

c

Start

 button with indicator light

For starting the selected programme.

d

 

IntenseZone

 button

Increases cleaning performance in
the lower basket.

e

 

Express

 button

For reducing the programme dura-
tion.

f

 

Timer

 button

For selecting a later programme
start.

g

OK

 button

To select menu options and values
displayed. 
To confirm messages.

h



 buttons

For programme selection. 
For changing the values displayed. 
For scrolling to other menu pages.

i

 

Back

 button

For navigating back to the previous
menu or deleting values that have
been set previously.

j

Programme selection button 

For programme selection.

k

Optical interface
For service technicians.

l

 

ON/OFF

 button

For switching the dishwasher on and
off.

Summary of Contents for G 7200





































































































Reviews: