Cleaning the spray arms
Because the spray arm jets can
become blocked, it is important to
inspect them every day.
^
Use a sharp pointed object to push
any particles into the spray arm jets,
then rinse thoroughly under running
water.
To do so, remove the spray arms as
follows:
^
Remove the baskets.
Upper basket or mobile unit spray arm
(if applicable):
^
Loosen the ring nut on the spray arm
and remove the arm.
Metal nuts are threaded left.
Ceramic nuts are threaded right.
^
Unscrew the
upper
spray arm.
^
After loosening the ring nut, remove
the
lower
spray arm.
^
After cleaning, re-insert the spray
arms and tighten down as needed.
After replacing the spray arms,
check to make sure that they rotate
freely.
Caring for the appliance
47
