2. Altering the wash tempera-
ture and/or the temperature
holding time in the "Main
wash"
(except with the SPECIAL
(AN) 93°C10’
programme) and
"Final rinse" programme
stages
Please make a note of any changes
to the temperature and / or the tem-
perature holding time in the appropri-
ate section of the programme chart.
The programme chart shows the factory
settings for the Main wash temperature
together with temperature holding time
and the Final rinse temperature with its
temperature holding time.
The special functions can be used to
alter the temperatures of the main wash
and of the final rinse from 30 °C - 93 °C
or 30 °C - 70 °C (
E
UNIVERSAL
programme) and the temperature hold-
ing time from 1-15 minutes.
^
Turn the programme selector to the
STOP position
f
.
^
Switch off the machine.
^
Press and hold
ß
and
6
at the
same time, and whilst doing so,
switch the machine on with the
I-0
button.
The current programme status "P..."
will appear in the display and the
p
/
6
indicator light will come on.
Main wash temperature:
^
Main wash 1:
Press
0
as often as necessary or
hold it pressed in until "E09" (pro-
gramming level 9) appears in the dis-
play.
Main wash 2 (programme
B
only):
Press
0
as often as necessary or
hold it pressed in until "E12" (pro-
gramming level 12) appears in the
display.
^
Turn the programme selector to the
programme which needs to be
changed. The actual value appears
in the display field after
°C
.
^
Press
ß
or hold pressed in, until the
required value appears in the display.
Note:
Temperatures above 55° C cause blood
denaturation and possibly fixation.
Main wash temperature holding time:
^
Turn the programme selector to the
STOP position
f
.
^
Main wash 1:
Press the
0
button repeatedly or
keep it held in until "E10" (program-
ming level 10) appears in the display.
Main wash 2: (programme
B
only):
Press the
0
button repeatedly or
keep it held in until "E13" (program-
ming level 13) appears in the display.
^
Turn the programme selector back to
the programme which needs to be
changed. The actual value appears
in the display field after
min
.
Programming special functions
43
Summary of Contents for G 7882
Page 3: ...Installation 53 Electrical connection 55 Plumbing 57 Technical data 60 Contents 3 ...
Page 65: ...61 ...
Page 66: ...62 ...
Page 67: ...63 ...