Loading the dishwasher
44
Cutlery
3D cutlery tray+
(depending on model)
Arrange the cutlery in the tray as
shown.
To make unloading much easier, cutlery
should be grouped in zones, one for
knives, one for forks, one for spoons,
etc.
Spoon heads should be placed in con-
tact with at least one of the serrated re-
tainers on the base of the cutlery tray to
ensure that water runs off them freely.
For optimum cleaning results arrange
spoons with the inner part facing the
center of the cutlery tray.
The upper spray arm must not be
blocked by items which are too big.
The side sections of the tray can be
moved into the middle using the yellow
grips in order to accommodate tall
cookware in the upper basket (see also
"Upper basket - Glassware rack").
If spoon handles do not fit between the
holders, lay them the other way round.