Settings menu
66
Rinse aid
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage is set in stages
from 0 to 6.
It is set to 3 at the factory.
If spots appear on dishware and glass-
ware:
– Increase the rinse aid dosage.
If clouding or smearing appears on
dishware and glassware:
– Decrease the rinse aid dosage.
Select the setting you want and con-
firm your choice with
OK
.
EcoStart
In order to run your dishwasher in the
most economical way, you can use the
EcoStart
option to take advantage of
your electricity supplier's time variable
rates (see "Options - FlexiTimer with
EcoStart").
With this option selected, your dish-
washer will start automatically at your
electricity supplier's cheapest rate
times.
To use this option, you must first set up
to three electricity rate time zones in
which the dishwasher can start. You
can allocate different priorities to these
time zones. The time with the cheapest
electricity rate will be given Priority 1.
Contact your electric supplier to find
out the times of the cheapest electricity
rates.
Once the electricity rate times have
been set, you can use the
EcoStart
op-
tion to set the latest finish time required
for each program.
The dishwasher will then start automati-
cally in the cheapest electricity rate time
and the program will end at the latest at
the finish time set.