Time of day
After the appliance has been con-
nected to the power supply or after a
power cut
0
•
00
with
AUTO
on the left will
flash in the display.
The time of day must be set before any
other processes can be set.
Setting time of day
(24 hour clock)
Midnight (24 hours) is shown as
0
•
00
.
Press the
g
and
h
buttons at the
same time.
In the display the dot after the first fig-
ure flashes. As long as this dot is flash-
ing, (approx. 4 seconds) you can set
the time of day. It is shown in hours
•
minutes.
Use the + or – button to enter the
time of day.
After four seconds if no further entry is
made, the oven display shows this
time. The dot between the figures now
stays on constantly to indicate that the
time of day has been set.
Once the dot has stopped flashing, you
would again have to press the
g
and
h
buttons simultaneously to change
the time of day.
Time of day
16
Summary of Contents for H 152 MB
Page 2: ...Description of the appliance Control panel Appliance Description of the appliance 2 ...
Page 62: ...62 ...
Page 63: ...63 ...