Using combination programmes
With combination programmes the
Microwave mode is combined with one
of the conventional functions, (Fan heat
or Grill).
A microwave process can only start
once the door is shut.
Mic Fan heat
Before starting the combination pro-
gramme you must select the micro-
wave power level and the time for the
process.
Turn the function selector to the com-
bination programme Mic
Fan heat.
The cooling fan starts up.
The display offers a suggested power
level of 300 W.
If this power level is not suitable for
your recipe, it can be altered using the
+ or – button.
The following power levels can be se-
lected:
80 W, 150 W, 300 W, 450 W.
To enter the time:
Press the
g
button.
For approx 4 seconds
0
•
00
ap-
pears in the display.
Within these 4 seconds set the re-
quired time using the + or – button.
The maximum time entry is 99 minutes
and 59 seconds.
With the power level
450 W
a maxi-
mum time of 60 minutes
can be en-
tered.
The time entered appears in the dis-
play in minutes
•
seconds. The
@
and
AUTO
symbols flash.
With the temperature selector
choose a temperature for the Fan
heat function.
Only turn the temperature selector
clockwise and then back again anti-
clockwise. Do not force it past the
resistance Otherwise it could be
damaged.
Press the Start/Stop button.
The oven interior lighting comes on.
The microwave function starts and the
oven begins to heat, The indicator light
on the control panel stays alight while
the oven is heating up.
Using combination programmes
28
Summary of Contents for H 152 MB
Page 2: ...Description of the appliance Control panel Appliance Description of the appliance 2 ...
Page 62: ...62 ...
Page 63: ...63 ...