The
@
and
AUTO
symbols stay on con-
stantly and the time entered counts
downwards. The oven door is locked.
At the end of the microwave time the
Microwave function, the heating and
the oven interior lighting switch off.
Three beeps sound and the symbols
flash. The beeps can be switched off
by pressing any button. The oven door
is no longer locked. The time of day ap-
pears in the display.
If the food is still not cooked, the func-
tion selector can be left pointing to
microwave mode. Repeat the other
steps in a different order as follows:
Press the
g
button.
Set the required time with the + or –
button.
The
AUTO
symbol flashes.
Press the
h
button.
The display offers a suggested
power level of 300 W.
The
@
symbol also flashes above the
dot.
Press the + or – button within 4 sec-
onds to enter the microwave power
level required.
Press the Start/Stop button.
The period of time set appears in the
display.
Deactivating the door lock before the
end
To deactivate the door lock, you will
have to interrupt the process.
Press the Start/Stop button.
During the interruption the time goes
on hold. The cooling fan continues to
work, the oven lighting goes out, and
the symbols flash.
To continue the process:
shut the oven door,
and press the Start/Stop button.
The oven light comes on again and the
symbols stay on constantly.
Switching off the appliance
The cooling fan prevents the build-
up of condensation in the warm ap-
pliance. Leave the cooling fan on
until the oven has cooled down suffi-
ciently.
Turn the function selector and the
temperature selector to "0", and this
will also turn off the cooling fan.
Using combination programmes
29
Summary of Contents for H 152 MB
Page 2: ...Description of the appliance Control panel Appliance Description of the appliance 2 ...
Page 62: ...62 ...
Page 63: ...63 ...