Rotary dials
Use the
V
Function dial
, for selecting
oven functions which require input e.g.
the time of day.
The
V
Function dial
can be turned
clockwise or anti-clockwise.
To select a function, turn the function
dial until triangle
V
is underneath the
symbol in the display of the function
you wish to make changes to.
If
triangle
V
–
is flashing
, alterations can be made
to the settings of the function
selected.
–
is lit up
, the function will be
displayed, but changes cannot be
made to it.
Whilst the
V
is flashing
, use the
(–/+) Input dial
immediately to make
any changes:
–
Turning it clockwise
, increases the
value shown or engages the
function,
–
Turning it anti-clockwise
, reduces
the value or switches the function off.
Triangle
V
will flash for approx. 5
secs.
Settings can only be changed whilst
it is flashing.
If this input period has elapsed you
will have to use the function dial to
re-select the function.
See chart for an overview of symbols in
the display and their settings.
The display will change at a different
rate depending on how quickly the dial
is turned:
– in one minute increments
– in 10 minute increments or
– hour by hour.
Controls
21