With Grill 1 and Grill 2:
Pre-heat the grill for at least 5 minutes
with the oven door closed before
placing the food under the grill.
To pre-heat
^
Turn the oven function selector to the
required function.
^
Select the required temperature.
^
When the required temperature has
been reached: Put the food into the
oven.
Cancelling the process /
switching off the oven
^
Turn the oven function selector to "0".
The oven is switched off:
all processes / symbol displays are
cancelled.
Exceptions:
– If the roast probe is being used, the
"
e
" symbol is lit.
– If a minute minder time has been
entered, the "
l
" symbol is lit and the
display shows the time counting
down.
Energy-save function
(Top oven - only)
If you are programming a cooking
process using the automatic timer, or if
you are cooking with the roast probe,
the residual heat is automatically used
to save energy.
Shortly before the end of the cooking
time the oven heating switches off. The
letters "EC" in the display indicate that
the energy-save function is in
operation.
The residual heat in the oven is
sufficient to complete the cooking
process.
The cooling fan continues to run, as
does the hot air fan if a "Fan" setting
had been chosen.
Oven lighting
When the oven is in operation the oven
lighting goes out approx. 15 seconds
after pressing the last button, to save
electricity.
^
To switch the lighting back on for a
short time, press one of the buttons.
The oven lighting goes on automatically
when an oven function has been
selected and the oven door is opened.
If preferred, you can set the oven
lighting to come on automatically as
soon as an oven function has been
selected, (see the Section on
"Programmable functions").
Oven - use
22