Using the roast probe enables the
roasting process to be monitored
simply and reliably.
The tip of the probe measures the
core
temperature
at the centre of the meat
continuously.
When the pre-selected core
temperature is reached, the oven
heating is automatically switched off.
The roast probe can be used with the
following functions:
– Auto Roast
E
– Conventional
A
– Fan Heat
D
– Fan Grill
N
Using the roast probe
^
Prepare the meat in the usual way.
^
Insert the probe as far as possible
into the meat.
The tip of the probe must reach the
central area of the meat.
Please note:
You can place the meat in a pot or on
the rack.
Roasting bags or aluminium foil may
also be used, but only when left open at
the ends. Insert the probe through the
foil or bag into the centre of the meat.
If fat or bone come into contact with the
probe, this can lead to the oven being
switched off too early. Therefore:
– do not let the probe touch any
bones.
– do not insert it into a particularly fatty
area of the meat.
If the meat is very heavily marbled with
fat, select the highest core temperature
given in the roasting chart.
The roast probe should not be used for
poultry or game birds as these contain
a lot of bone.
If your oven is fitted with a telescopic
carriage it is best to remove the runners
before using the roast probe.
Roasting with the Roast Probe
38