Oven interior
To make cleaning easier you can
– remove the oven door,
– take out the runners,
– take out the back panel,
– take out the side panels (if fitted)
– lower the top heating element.
To remove the oven door
Please note : the oven door is heavy.
It should be gripped firmly at the
sides when being removed or
refitted.
^
Open the door fully.
Before the door can be removed, the
door hinges need to be locked so
that they do not damage the door
when it is taken out.
^
Flip down the locking clamps on
each door hinge. This locks the
hinges.
^
Lift the door up until it is nearly in the
closed position. The hinges will
automatically swing out in this
position, then remove the door.
To re-fit the oven door
^
Hold the door as shown above and
carefully put the locked hinges into
the guide holes until they engage.
Open the door fully.
^
Still supporting the door, flip the
locking clamps up.
It is essential that the locking clamps
are flipped up when the door is
re-fitted after cleaning. Otherwise on
closing the door, the hinges could
work loose from the guide holes and
this could result in damage to the
door.
Cleaning and care
55