Problem
Possible cause and remedy
A fault code
appears in the
display: F + number
–
F 23
: The pyrolytic temperature was not reached.
This could have been caused by too much soiling in the
oven to start with.
Remove all coarse soiling before starting the pyrolytic
cleaning programme again.
If the fault code appears again, please contact Miele.
–
F 32
: The door has not locked.
Interrupt the pyrolytic cleaning programme by switching
the oven off. Then start the pyrolytic programme again.
If the fault code appears again, call Miele.
–
F 33
: The door lock for the pyrolytic cleaning programme
will not open.
Interrupt the pyrolytic cleaning programme by switching
the oven off. If the safety lock still will not open, please
call Miele.
For
all other fault codes
, please contact Miele.
Problem solving guide
56